رَصَّاص الطرق للبيع XCMG official 4 ton small road roller XMR403

Static Linear Pressure: 157N/cm

Exciting Force: 42KN

Grade Ability: 30%

Vibration wheel: 800*1300mm

Minimum turning radius: 3062/4362mm

Minimum ground clearance: 348mm

Travel Speed: 0-10.6km/h

Vibrational frequency: 60Hz

XCMG official 4 ton small road roller XMR403.

XCMG small road roller XMR403 is a light vibratory roller with operating weight of 4 tons. XCMG small road roller XMR403 is suitable for surface and edge compaction construction for asphalt engineering, cement engineering and so on, also suitable for sub-base and base, sand and gravel material compaction work. 

XCMG small road roller XMR403 is the idealist compaction machinery for all sorts of parking lot construction, road, sidewalks and bikeway compaction, as well as a variety of road maintenance engineering.

Performance Characteristics:

1. Closed hydraulic drive system is adopted to realize stepless speed change.

2.Brake system uses the neutral position braking, emergency braking and parking brake, short braking distance and high braking torque, ensuring the safety of the product.

3. The vibration system can realize the simultaneous vibration and independent vibration of the rear and front drum, and meets the different working conditions.

4. High frequency vibration and excitation force design, high working efficiency, good compaction effect.

5. Large ground clearance and curb clearance, strong trafficabilit, good edge com- paction performance.