صهريج السماد السائل

The PN-50 slurry tanker is designed as a self-supporting tank mounted on a single-axle wheel set.;tank-A steel tank with a central frame, hot-dip galvanized, has internal reinforcement rings. The rear floor is closed with a hatch Ø 600 mm. Glass sight glasses in front below. The tank above has an overflow protection.;COMPRESSOR;A JUROP PN 45M compressor is fitted to the forklift's drawbar as standard.;DRAIN VALVE;A hydraulically controlled 4'' MEPROZET drain valve with a tiltable pouring spoon is attached to the tailgate. There is a 2 inch tap pipe at the bottom of the tank for connecting an additional drain hose, B. for watering.;STIRRER;On special request, the forklift can be equipped with a hydraulically driven screw mixer that can continuously mix the tank contents.;The car is filled by the vacuum created in the tank by a compressor driven by the tractor's PTO. Emptying is by overpressure or gravity.;;ROLLING SYSTEMS;The sprinkling is done with a scoop, which is part of the sta